Operating Dehumidifier - Whirlpool 1185020 Use And Care Manual

Note: Before turning dehumidifier on,
be sure that:
• Dehumidifier is plugged into the wall
outlet
• Bucket is properly inserted into
dehumidifier
• Bucket is empty
Control A
Control B
selects fan speed
If your control looks like A or B:
TO TURN DEHUMIDIFIER ON:
Turn DRYNESS CONTROL clockwise.
FAN SPEED:
(Models with Control B only): This
controls fan operation. Use desired
setting.
HIGH - for faster moisture removal.
LOW - for slower moisture removal.
DRYNESS CONTROL:
This controls the amount of moisture in
the room.Turn control knob clockwise
for more drying.Turn control knob
counterclockwise for less drying.Turn
control knob to "NORMAL" to maintain
average humidity conditions.

Operating dehumidifier

Safety information
EMPTY/ADJUST
HIGH
BUCKET
LOW
OFF
DRYNESS CONTROL
FAN SPEED
EMPTY/ADJUST
HIGH
BUCKET
LOW
OFF
FAN SPEED DRYNESS CONTROL
indicates the bucket is full
OR
the bucket is not in position
adjusts humidity removal set
point (amount of moisture
removed from room)
CONTINUOUS
indicates the bucket is full
OR
the bucket is not in position
adjusts humidity removal set
point (amount of moisture
removed from room)
CONTINUOUS
NOTE: For the first few days of use, turn
the DRYNESS CONTROL clockwise to
"DRYEST" to remove extra moisture from
the furnishings as well as the room air.
EMPTY/ADJUST BUCKET light:
If this light is on, the dehumidifier is not
running. This light indicates that you
need to check:
• If the bucket is full, empty bucket and
replace.
• If the bucket is not in position,
remove bucket and replace. Make
sure the bucket fits all the way into the
dehumidifier and the light is off,
or dehumidifier will not run.
TO TURN DEHUMIDIFIER OFF:
Turn DRYNESS CONTROL
counterclockwise to OFF.
5 5