Cooking At Lower Cook Powers - Whirlpool SM958PES Use & Care Manual

4.
Touch START.
d
count
awn
The oven will automati-
cally cook at HIGH Cook
Power.
The COOK 1 Indicator Light
will stay on to show that the
oven is cooking in the first
cycle.
The Display counts down
the time to show how much
time is left in the first cycle.
When the cooking time ends,
"End" will show on the Display
and 4 beeps will sound. (You
can stop the beeping by
opening the door or by touch-
ing CANCEL.) "End" will remain
on the Display and a reminder
tone will sound every 60 sec-
onds (to remind you that food
is left in the oven] until the door
is opened or CANCEL is
touched. The Display will then
show the time of day.
Changing the Cooking Time
Cooking time can be changed any time before or after touching START:
1. Touch COOK 1.
2. Touch Number Pads for the new time.
3. Touch START.
Cook 1 cycle will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook
Power, the slower the cooking. Each Number Pad also stands for a different
percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook
tell you, by number, which Cook Power to use. Recipes in other books and
magazines may tell you by name (HI, MED, LO, etc.) or percentage (IO%, 50%,
80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad
stands for, and Cook Power name usually used:
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power (fan and light will be off)
12