Setting The Clock - Whirlpool SM958PES Use & Care Manual

Setting the Clock
When the oven is first plugged in, a tone sounds and the display shows 88:88.
If the electric power ever goes off, the Display will again show all 8's when the
power comes back on.
You can cook or use the Minute Timer without setting the Clock, but the Display
will be blank after cooking.
DO THIS...
THIS HAPPENS...
The Display will show a "0"
and the colon will start to
flash. The first Number Pad
must be touched within
5 seconds or the Display
will go blank. Touch
CLOCK SET again and
continue.
n n n
WWW
2. Touch Number
Pads for the right
time of day.
a* ..*:
The Display will show what
numbers you touched in
the order you touched
them. This example shows
- --
The colon will stop flashing.
The Clock is set.
If you have touched in an
incorrect time, such as
12:65, "Err" will show on the
Display. Touch CLOCK SET
and start over.
NOTE: To etthe Clock, touch CLOCK SET. The current time will show on
the Display and the colon will flash. Set the Clock as shown above.