Disposal - Beurer BR 60 Instructions For Use Manual

Problem
The device does not
switch on, even though
the batteries have been
replaced and the ON/
OFF switch (2) has
been set to ON.
Device outputs
5 acoustic signals and
the illuminated ring (4)
flashes.

10. Disposal

Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper operation can no longer
be guaranteed in this case.
• Do not open the device. Failure to comply with this instruction will void the
warranty.
• Repairs must only be carried out by Customer Services or authorised re-
tailers. Before making a claim, please check the batteries first and replace
them if necessary.
Possible cause
The device may be
faulty.
This indicates a po-
tential malfunction.
32
Solution
Please contact
Customer Services.
Switch the device
off and repeat the
application again after
10 minutes.
Please contact
Customer Services if
the fault occurs again.