3
Installation
3.1
Safety Information
WARNING
WARNING
WARNING
WARNING
Edition: February 2020
Installation and setting to operation must be performed by trained
and qualified personnel.
Observe the distance to a magnetic compass when the mounting
place is defined (refer to Dimensional Drawing 130-626.HP005).
When establishing cable connections ensure that the cables are
disconnected from any power supply.
It is essential to ensure that all cables are disconnected from the
power supply, if necessary, measure the voltage beforehand and/or
disconnect the relevant distributor.
While connecting cables to the equipment, do not bend cables to
acute angle, pinch, twist, or impact excessive force.
Cracks or damage to the cable coating can cause a fire or electrical
shock.
3-1
Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
4352.DOC010002