Speed Source Du - Raytheon Anschütz Standard 22 GYRO COMPASS Operator's And Service Manual

1.4.2.4

Speed Source DU

The source of the speed and the type of speed – necessary for the speed error
correction – can be selected in this sub-menu.
Puls-Log is selected by default.
CAUTION
Figure 1-9
Table 1-1
Puls-Log
VHW
VTG
VBW Wtr
VBW Gnd
selected
available
not available
For changing the speed source, see chapter 2.9.4.
Edition: February 2020
This function cannot be adjusted in DV-Bus operation, because the
speed sensor is not connected to the distribution unit (display
information by selecting this menu is "Not accepted").
The same happens if no external speed sensor is connected.
Speed Source DU
Speed Source DU
Display
Water speed and heading
Course over ground and ground speed
Water speed
Ground speed
Connected and selected
Connected but not selected
Possible but currently not connected
Description
1-15
Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
4352.DOC010002