Lamp Test; Figure 2-20 Lamp Test - Raytheon Anschütz Standard 22 GYRO COMPASS Operator's And Service Manual

2.11

Lamp Test

The lamp test is designed to ensure the proper function of operating and display elements
at the device.
Figure 2-20
Pos. No.
1
2
1. Press the brightness button (Figure 2-20/1) and the set button (Figure 2-20/1)
simultaneously for approx. 3 sec.
2. Follow the instructions on the display to check the functionality.
Edition: February 2020
A lamp test during an alert is not possible.
Alerts are not displayed during a lamp test.
Lamp Test
Designation
Brightness
Set
- The LEDs light up and an acoustic alarm occurs.
The software version is shown at the end of the test.
2-27
Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
4352.DOC010002