Using Your Sound Hub Compact - Dali SOUND HUB COMPACT Manual

DIAGRAM 9

4. Using your SOUND HUB COMPACT

With you SOUND HUB COMPACT installation
complete and speakers connected you can begin to
enjoy its performance. The SOUND HUB COMPACT
top panel indicators and icons display source selection
and volume. The SOUND HUB COMPACT is controlled
exclusively from its remote control. Diagram 9
illustrates the remote control buttons.
•
•
•
•
•
16
To switch on your SOUND HUB COMPACT from
standby mode, press the remote control Standby
button ( ), or any of the source select buttons.
To adjust speaker volume, press and hold the remote
control up ( ) or down ( ) buttons.
To mute or un-mute audio, press the remote control
MUTE ( ) button.
To select an audio source, press one of the remote
control Source buttons.
To skip one track forward, press
track back, long-press or double-press
To disconnect a Bluetooth source, long-press
NOTE:
If the SOUND HUB COMPACT rear panel Auto Source Select
switch is set to ON, the SOUND HUB COMPACT will both switch
on from standby mode as soon as an input source become active,
and switch to a new source if the selected source is not playing.
NOTE:
If the SOUND HUB COMPACT is left in operational mode with
no source playing for more than 20 minutes it will automatically
switch to standby mode.
NOTE:
If you have more than one SOUND HUB COMPACT, you can
easily change the Bluetooth name of the SOUND HUB COMPACT.
To do so, press and hold the LINK & CONNECT button. The
Bluetooth indicator will illuminate after 3 seconds. While you keep
. To skip one
holding the LINK & CONNECT button pressed, you can now select
.
one of ten indicator positions with the volume up ( ) / volume
.
down ( ) buttons on the remote control. Each indicator position
will correspond to a Bluetooth name (1 to 10). Once the LED
position has been chosen, release the LINK & CONNECT button.