Key Connection Points; Location Requirements - Midea MDT24H3AST Installation Instructions Manual

Tools Needed
Tubing Cutter
Wire Stripper

KEY CONNECTION POINTS

Front
a
a
Water Connection
b
Electrical Junction Box

LOCATION REQUIREMENTS

IMPORTANT:
•
Do not run drain lines, water lines or electrical wiring where they can
interfere with or contact dishwasher motors or legs.
•
The location where the dishwasher will be installed must provide
clearance between motors and flooring. Motors should not touch the
floor.
•
The opening must have a level floor. (If floor at front of opening is
not level with floor at rear of opening, shims may be needed to level
dishwasher).
•
Do not install dishwasher over carpeted flooring.
•
The dishwasher must be fully enclosed on the top, sides and back and
must not support any part of the enclosure.
•
The dishwasher must be installed so that the drain hose is no more
than 10 ft in length for proper drainage.
Hole Saw Set
b
c
Drill and Bits
Back
c
Drain Hose Connection
7