Contents; User Safety - Stanley RL HW Manual

ENGLISH

Contents

• Safety
• Product Overview
• Feature Set
• Keypad, LED, and LCD
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifications

User Safety

WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certified safety glasses.
These glasses are ONLY used to enhance the
visibilty of the beam in brighter environments or
at greater distances from laser source.
Retain all sections of the manual for future reference.
8
FMHT77496 / FMHT77429 / FMHT77439 / FMHT77497 / FMHT77427
WARNING:
• The following label samples are placed on
your laser tool to inform of the laser class for
your convenience and safety. Please reference
the Product Manual for the specifics on a
particular product model.
IEC /EN 60825-1
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007
CAUTION:
• Changes or modifications to this unit not
expressly approved by the party responsible
for compliance could void the user's authority
to operate this equipment.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation
FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630 - 670 nm