Turning on the high beam headlights
1
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
2
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
Automatic light off system
■
Opening the driver's door with the engine switch in the "ACC" or "LOCK"
●
position will turn the headlights and tail lights off.
All lights turn off 10 minutes after the engine switch in the "LOCK" position.
●
To turn the lights on again, turn the engine switch to the "ON" position, or turn
the headlight switch off once and then back to
Light reminder buzzer (if equipped)
■
A buzzer sounds when the key is removed from the engine switch and any
door is opened while the lights are turned on.
NOTICE
To prevent battery discharge
■
Do not leave the lights on longer than necessary when the engine is not
running.
AVANZA_OM_General_OMBZ214
4-3. Operating the lights and wipers
or
147
4
.
Need help?
Do you have a question about the Avanza and is the answer not in the manual?