Operation; Layout - Schaudt LT 100 Operating Instructions Manual

2
1.1
Fig. 2 Layout of LT 100 control panel
1 Touch sensor
-- --
Main 12V ON/OFF switch:
For switching on and off the 12V supply of the
1.1
vehicle
1.2 Check of leisure area battery voltage
1.3 Check of water tank level
1.4 Check of waste water tank level
General information
on using
the touch sensors
8310068 BA / EN
Operating Instructions Operator and control panel LT 100
3

Operation

3.1

Layout

The LT 100 control panel is intended for installation in a cabinet or wall.
2.1
The LT 100 control panel has touch-sensitive sensors. These sensors react
when touched with a bare finger. The LT 100 control panel cannot detect
touches when gloves are worn (such as for camping in winter). Gloves must
therefore be removed before use.
2.2 2.3 2.4
1
2 Displays
LED mains indicator (yellow):
The LED lights up when mains voltage is pre-
sent at the input of the vehicle mains supply
2.1
(also refer to the instruction manual for the
relevant EBL ... / CSV ... power supply in sec-
tion "Starting up").
Indicator LED (green):
2.2
Indicates the system is switched on.
4 LEDs (red -- yellow -- green -- green):
Display of the battery voltage in four incre-
2.3
ments with voltage information and total di-
scharge warning.
4 LEDs (blue):
2 4 2.4 Display of water and waste water tank levels Display of water and waste water tank levels
(four increments).
Date: 19.07.2018
1.2
1.3
1.4
3