What To Do If - Motorola T180 Manual

Angel.book Page 77 Monday, April 24, 2000 8:04 PM
You can't switch your phone on
You can't make calls
You can't receive calls
Your phone won't unlock
Your PIN is blocked
Your PIN2 is blocked
Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See 'Important
Battery Information'.
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if
you are in a building, move closer to a window.
Check that your phone is switched on.
Check the Network Selection settings. Try Manual Selection, or try another network. See 'Network
Search'. Network and subscription dependent feature. Not available in all areas.
Check your Operator coverage map.
Restricted
Is displayed? Check the Call Barring and Fixed Dialling settings.
Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your
Service Provider. See 'Set Total Charge Limit'.
Has a new SIM card been inserted? Check that no new restrictions have been imposed.
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if
you are in a building, move closer to a window.
Check the Call Diversion and Call Barring settings.
Check the Ringer settings. If it is off, there is no audible alert. See 'Ringer On or Off'.
Have you inserted a new SIM card? Enter the new PIN code. See 'Entering Your SIM Card PIN
Code'.
Do you have a replacement phone? Enter the default phone unlock code - 1234.
Have you forgotten the unlock code? Press
security code).
Enter the PIN unblocking code supplied with your SIM card (see 'Unblocking Your Phone').
Enter the PIN2 unblocking code supplied with your SIM card (see 'Change SIM PIN2 Code').

What to do if...

$
to change the unlock code (you will need your
What to do if...
77 English