Motorola T180 Manual page 59

Angel.book Page 57 Monday, April 24, 2000 8:04 PM
Select Phone Line
i Press E . Select the Quick Access feature (Switch Line
1/2?).
This option allows you to switch between Line 1 and
Line 2.
AAvailability depends on the type and settings of the
SIM card, and/or your subscription to this feature.
AThis feature is not available when you are using the
GSM 900 band.
Adjust Ring Volume
This option is used to set the incoming call ring tone
volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the
front of your phone.
i Press E followed by the volume button to either
increase or decrease the ringer volume.
Ring or Vibrate
j
i Press E . Select the Quick Access feature (Vibrate On/
Off?).
This option sets the way your phone alerts you to an
incoming call. The options are:
• Ring Only - The phone will ring with the tone specified
by the Set Ringer Tone option.
• Vibrate Only - The phone will vibrate using
VibraCall .
™
• Vibrate Then Ring - The phone will vibrate twice and
then ring.
• No Ring or Vibrate - The phone will only display the
Call message.
AThe setting you choose also defines the type of alert
for an incoming SMS message (except that if you select
Vibrate Then Ring, your phone will just vibrate).
Ringer On or Off
Sets incoming call alert to either a ringer tone or a display
message.
Using the Options Menu
57 English