Symbols Of The Display; General Specifications - PANCONTROL PAN 149 Manual

6. Symbols of the Display

AC
DC
AUTO
MAX
H

A
V
-
OL

7. General Specifications

Display
Overload indicator
Range selection
Polarity
Measuring rate
Overvoltage protection
Internal impedance
Continuity test
AC voltage / current
DC voltage / current
Battery low
range selection active
Diode test active
Audible continuity test active
Maximum
Data hold is active
Ohm (Resistance)
Ampere (Current)
Volt (Voltage), Millivolt
Polarity
Overload - measured value too large for the selected range
3½ Digits (up to 3999)
OL
automatically
automatically (minus sign for
negative polarity)
2x / s
600 V / 250 V (Watt DC)
> 7,8 MΩ
Beeping sound in less than 100 
Test voltage 0,45 V
EN 9