AEG PREMIUM 7 Series Instruction Book page 26

Getting started
B
A
4. Place tool (A) on the tool shaft (B):
GB
Align the pin at the top of the tool
(whisk, dough hook, beater) with the
slot on the shaft. Push attachment up
and turn it counterclockwise until the
pin is locked into position. To remove
attachment, push upwards, move it
clockwise and pull down and out.
7. Move the Speed selector from "OFF"
to desired speed (1-10). Once mixing
is complete, turn the Speed selector to
"OFF" and unplug the appliance.
Note: Always start on the slowest
possible speed to avoid splashing
ingredients out of the bowl.
26
B
5. Tilting the Motor head down:
gently press the lever (A) down and
slide the motor head (B) downwards
with your other hand until it locks into
correct position. Insert the plug in the
main socket.
8. Work light and Power indicator
light: If the appliance is plugged in
and a speed is selected, a white LED
lights up around the speed selector.
A work light will also light up over the
working area. If the Speed selector is
moved to "OFF", the working light will
automatically shut off after 3 min.
A
6. Place the bowl cover* on the bowl.
Gently push the cover down until it
locks into place. Only add ingredients
using the pouring hole on the bowl
cover.
*Included in specific models.
9. Note: If the speed selector is already
turned on before the appliance is
plugged in, the speed selector LED
light will flash off and on to let you
know the speed selector has been left
on. Turn the Speed selector to "OFF"
and the lights will stop flashing. Then
resume operating normally.