Philips GoSure ADR830 User Manual page 26

4.
Loosen the knob to adjust the device into the correct
position. Then tighten the knob to make sure the
device securely locked.
5. Connect the micro USB connector of the OBD cable
to the Micro USB port of the device.
6. Plug the OBD cable into your vehicle's OBD socket.
7. Paste the DC converter box of the OBD cable near the
device.
A
Attention:
1. In most cars, the OBD port is located in area A, B, C, D
or E.
2. To prevent the OBD cable from hanging unsafely
or extruding further than 10 mm into the car cabin,
PLEASE USE CABLE CLIPS TO SECURE THE OBD
CABLE!
3. The mounting of the device and the OBD cable should
NOT interfere with the normal operation of vehicle's
original equipment, such as the airbag, etc.
26
B
C
1 8
9 16
D
E
1 8
9 16