Typical Pond Installation - Alpine Eco-TWIST PXX1500 Instruction Manual

TYPICAL INSTALLATION FOR YOUR POND
The Eco-Twist™ pump is designed to be submerged directly into the pond or out of the pond as long as water
is running through the pump. To maximize pond circulation, locate the pump as far away as possible from the
location of the water running into the water feature.
It is recommended that the pump is NOT positioned in the deepest area of the pond. This will protect the fish from
suffocating by preventing the pond from completely draining in case of a leak in the tubing. Bricks or stones can be
used, if needed, to raise the pump up off the bottom of the pond. The pump should be placed a maximum depth of
13 feet.
For more information about our company or products, please visit our website at www.alpine4u.com or call us (USA) 1-877-710-0162
Min. 6.5ft
Min. 4in
(Figure 4.1)
Max. 13ft
Min. 6.5ft
6