Introduction; Safety Information - Alpine Eco-TWIST PXX1500 Instruction Manual

Alpine's Eco-Twist™ high performance pumps are ideal for filtration systems, waterfalls, and ponds. Engineered
to be highly energy efficient while maintaining maximum output. Our durable "pre-filter" pump cage minimizes pump
damage and clogging by selectively screening larger debris particles. Pumps feature a convenient carrying handle
and 360° rotating adapters for easy placement. Includes "click fit" connecters to allow simple disassembly for routine
maintenance and compatibility with other Alpine series pond systems. For select models, the precise controller enables
pumps to customize and adjust water flow on any application.
For a car to stay in great condition, proper maintenance is required. Therefore, Alpine suggests that once a week,
you verify that the pump is performing adequately. If you detect a drop in pump performance (such as a decrease in
water flow from the pump or to the waterfall), first clean the pump's pre-filter cage and the tubing connected to the
pump. If the water flow is still not fully restored to its original performance, simply clean the impeller and internal pump
body. (See pages 3 & 4 for maintenance instructions)
:
WARNING
Risk of electric shock – This pump has not been approved for use in swimming pool or marine areas-
:
WARNING
T
o provide continued protection against risk of electric shock, connect to properly grounded, ground
fault circuit interrupter (GFCI) outlets only, using the following guidelines:
(A) Read and follow all safety instructions and all the important notices on the appliance before using the pump.
Failure to do so may result in loss of fish life and/or damage to this appliance.
(B) Have a qualified electrician install a properly grounded receptacle outlet, acceptable for outdoor use and
protected from snow and rain.
(C) Any wiring of pumps should be performed by a qualified electrician to ensure code compliance and user
safety.
(D) This is a pond pump. This pump has been evaluated for use with water only. Do not use this pump for other
than intended use (i.e.: Do not use in swimming pools, aquariums, etc. Not to be used as a sump pump).
(E) Do not use this pump in swimming pools or other situations where people are immersed
(F) If an extension cord is necessary, ensure connection is watertight and dust proof. A cord with proper rating
should be used. A cord rated for less amps or watts than the appliance rating may overheat. Care should be
taken to arrange the cord so that it will not be tripped over or pulled. The connection should be carried out
by a qualified electrical installer.
(G) Unplug pump at receptacle outlet when not in use or before removal from pond.
(H) To reduce risk of electrical shock, all wiring and junction connections should be made per local codes.
Requirements may vary depending on usage and location.
(I) Inspect the power cable before using. The power cable should be protected at all times to avoid punctures,
cuts, bruises and abrasions. Never cut the cord.
(J) Never handle power cords with wet hands.
(K) To avoid injury, do not touch moving or hot parts.
(L) Do not use power cable to lift pump. (See figure 1.1)
IMPORTANT:
Alpine Corporation is not responsible for losses, injury, or death resulting from a failure to observe
these safety precautions, misuse or abuse of pumps or equipment.
For more information about our company or products, please visit our website at www.alpine4u.com or call us (USA) 1-877-710-0162

INTRODUCTION

SAFETY INFORMATION

Figure 1.1
2