Subscribe to Our Youtube Channel
Related Manuals for Alpine HURRICANE PAB1500
Summary of Contents for Alpine HURRICANE PAB1500
- Page 1 HURRICANE POND PUMP™ Instruction Manual Operates Operates the water! the water! •PAB1500 •PAB2100 •PAB3100 •PAB4100...
-
Page 2: Table Of Contents
Warranty is valid against defects due to material and the company’s workmanship only. The sole obligation is at Alpine’s discretion to replace/repair the defective unit with a suitable replacement part. Units should be checked for proper operation prior to returning as defective. No liability for loss or damage of any nature or kind, whether arising out of or from the use of the product, whether defective or not defective, is assumed by Alpine Corporation or its affiliates. -
Page 3: Introduction
For a car to stay in great condition, proper maintenance is required. Therefore, Alpine suggests that once a week, you verify that the pump is performing satisfactorily. If you detect a drop in pump performance (such as a decrease in water flow from the pump or to the waterfall), first clean the pump’s pre-filter cage and the tubing connected to the... -
Page 4: Components And Pump Parts
COMPONENTS AND PUMP PARTS Pump Body Elbow Adapter 0.75”-1.25 0.75”-1.5 For Models: For Models: PAB1500 PAB4100 PAB2100 PAB3100 Impeller Housing O-Ring Impeller Pump Body Cover Pump Pre-filter Cage Multi-Hose Adapter 0.75”-1.25 0.75”-1.5 For Models: For Models: PAB4100 PAB1500 PAB2100 PAB3100 (Chart 1.1) For more information about our company or products, please visit our website at www.alpine4u.com or call us (USA) 1-877-710-0162... -
Page 5: Installation
PUMP INFORMATION ALPINE AMPS WATTS OUTLET CORD GPH FLOW RATE ITEM # (MIN-MAX) (MIN-MAX) FLOW HEIGHT CONNECTION LENGTH 10ft 11ft 13ft 16ft 20ft PAB1500 1585 11’ 5” 3/4”-1 1/4” 33’ 1500 PAB2100 1.20 2115 13’ 1” 3/4”-1 1/4” 33’ 2100 1215 PAB3100 1.60... - Page 6 The threaded collar on all of the Connect the other end of the pump fittings enables the Hurricane pump tubing to an Alpine pond filter, waterfall, to be installed and removed without or water feature. the need for any tools. Do not use...
-
Page 7: Operation And Maintenance
OPERATION AND MAINTENANCE WARNING Always unplug or disconnect all appliances in the pond from the electrical supply before installing, repairing, maintaining or handling the equipment in the water. To avoid shortening the life of the pump, follow these simple maintenance procedures: -Once a week, verify that the pump performance is satisfactory. -
Page 8: Replacing The Impeller
REPLACING THE IMPELLER If you have thoroughly cleaned the pre-filter cage and still have diminished flow rates, then you will need to remove and inspect the impeller and internal pump body. (Figure 5.1) Unscrew the four screws and remove the pre-filter from the pump. - Page 9 (Figure 5.6) After the impeller and impeller housing are cleaned, place the impeller back into the impeller housing. Twist the impeller to either the left or right until it clicks into place. (Figure 5.7) There are pins on the impeller housing that the impeller will click into.
-
Page 10: Winter Pump Care
WINTER PUMP CARE In cold climates, Alpine highly recommends to store your pump inside during the coldest months of the year. You may still use your Hurricane pump during the winter time, but the Hurricane pump cannot be used in below freezing temperatures. -
Page 11: Replacement Parts List
REPLACEMENT PART LIST FOR HURRICANE PUMPS Alpine Pump SKU# Alpine Replacement Parts Description Impeller PAB1500 PAB1500-IMP Impeller for PAB1500 PAB2100 PAB2100-IMP Impeller for PAB2100 PAB3100 PAB3100-IMP Impeller for PAB3100 PAB4100 PAB4100-IMP Impeller for PAB4100 Fittings PAB1500 PAB-FIT Fitting for PAB1500...
Need help?
Do you have a question about the HURRICANE PAB1500 and is the answer not in the manual?
Questions and answers