Preparation; Unpacking; Disposal Of The Packaging; Setting Up And Connecting To The Power Supply - Silvercrest SKACD 1000 A1 Operating Instructions Manual

GB

Preparation

IE

Unpacking

CY

Disposal of the packaging

Setting up and connecting to the power supply

6
♦
Remove all components of the appliance and the operating manual from
the carton.
♦
Remove all packing material.
The packaging protects the appliance against transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated.Dispose of packaging material that is no
longer needed as per the regionally established regulations.
NOTICE
► If possible, preserve the appliance's original packaging during the warranty
period so that, in the event of a warranty claim, you can pack the appliance
ideally for its return.
RISK - ELECTRICAL SHOCK!
► Under no circumstances should the appliance be located close to water,
especially to fi lled sinks and other waterfi lled vessels. Use the coff ee
machine only on a thoroughly dry surface. The proximity of water
presents a danger, even when the appliance is switched off . After use,
always disconnect the plug from the mains power socket.
WARNING - PROPERTY DAMAGE!
► Never locate the coff ee machine close to sources of heat.
► To avoid damage to the appliance and the location area, use the coff ee
machine only on a fl at and heat-resistant surface.
1) Place the appliance on a dry and heat-resistant surface.
2) Place the glass jug 7 on the keep-warm plate 4 in the appliance.
3) Finally, insert the plug into the power socket.
SKACD 1000 A1