Table of Contents
Advertisement
Installation
h It is possible to connect indoor units since Feb. 2009.
h It can be the cause of malfuctions when there is no setting of master and slave.
h In case of Group Control, it is possible to use following functions.
- Selection of operation, stop or mode
- Temperature setting and room temperature check
- Current time change
- Control of flow rate (High/Middle/Low)
- Reservation settings
It is not possible to use some functions.
2. Group Control 2
n Wired remote controllers + Standard Indoor Units
Master
Donʼt connect serial 12V line
Master
h It is possible to control 16 indoor units(Max.) with the master wired remote control.
h Other than those, it is same with the Group Control 1.
26 Vertical Air Handling Unit
Master
Display Error Message
Master
LGAP Network System
or
Slave
GND
Signal
Slave
12 V
Hide quick links:
Advertisement
Table of Contents
