Toro Edge Series Operator's Manual page 22

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
03721 400000000 and Up
03722 400000000 and Up
03727 400000000 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
David Klis
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
October 20, 2016
Declaration of Incorporation
Product Description
27-inch 8-Blade Edge Series
Cutting Unit, Reelmaster
7000-D Traction Unit
27-inch Edge Series 11-Blade
Cutting Unit, Reelmaster
7000-D Traction Unit
32-inch 8-Blade Edge Series
Cutting Unit, Reelmaster
7000-D Traction Unit
Invoice Description
RM7000 27IN 8-BLADE
ES (RR) DPA CU
RM7000 27IN 11-BLADE
ES (RR) DPA CU
RM7000 32IN 8-BLADE
ES (RR) DPA CU
EU Technical Contact:
Marc Vermeiren
Toro Europe NV
B-2260 Oevel-Westerloo
Belgium
Tel. 0032 14 562960
Fax 0032 14 581911
General Description
Cutting Unit
Cutting Unit
Cutting Unit
Directive
2000/14/EC
2006/42/EC
2000/14/EC
2006/42/EC
2000/14/EC
2006/42/EC