Advertisement
Quick Links
Serger Accessories
Alternate Chain/
Cover Stitch Table
(BLES8-CST)
Instructions
This table has additional holes to attach the Knit Woven Bias
Binder for chain/cover stitching on your Baby Lock Ovation
serger.
1. To use the Chain/Cover Stitch table for chain/cover
stitching, you will need to change the cutting blade cover
as follows:
A) Open front cover and cutting blade cover (fig. A & B).
Baby Lock
B) Depress the center snap and gently pull toward you
A
B
www.babylock.com
to unsnap cutting blade cover (fig. C) and then snap
Chain/Cover Stitch table into place.
C
(Instructions continued on back)
Advertisement
Related Manuals for Baby Lock BLES8-CST
Summary of Contents for Baby Lock BLES8-CST
- Page 1 (BLES8-CST) Instructions This table has additional holes to attach the Knit Woven Bias Binder for chain/cover stitching on your Baby Lock Ovation serger. 1. To use the Chain/Cover Stitch table for chain/cover stitching, you will need to change the cutting blade cover...
- Page 2 E) Turn cutting blade locking dial to “LOCK.” F) To close the Chain/Cover Stitch table door, raise to the “Up” position and slide to the left, placing the tab of the table under the needle plate (fig. E). LNIS-BLES8-CST www.babylock.com...