Baby Lock BLQ2-QGF Instructions

Adjustable Guide foot (BLQ2-AGF)
Sewing Accessories
Adjustable Guide foot (BLQ2-AGF)
1/4" Foot with Guide
Instructions
The 1/4" Foot with Guide is designed to help you
achieve perfect 1/4" seams when piecing. Simply align
the fabric edge next to the guide. The distance between
the needle and the right guide is a true 1/4". The 1/4"
marks place the grey guide farther to the right
Foot with a guide is also perfect for 1/4" topstitching
from an edge.
For projects that require the utmost accuracy, such as garment sewing, topstitching or
piecing the perfect while quilt, this foot comes prepared to help. The built-in ruler with
marks place the grey guide farther to the right
adjustable guide is perfect for keeping your measurements precise at all times.
INSTRUCTIONS:
For projects that require the utmost accuracy, such as garment sewing, topstitching or

Removing the presser foot

Removing the presser foot
piecing the perfect while quilt, this foot comes prepared to help. The built-in ruler with
Raise the presser foot (a).
Raise the presser foot (a).
adjustable guide is perfect for keeping your measurements precise at all times.
Removing the presser foot
Raise the presser foot (a).

Attaching the presser foot

Attaching the presser foot
Lower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower the
Lower the presser foot holder (b) until the notch
presser foot holder (b) and the presser foot (e) will engage automatically.
(c) is directly above the pin (d). Lower the presser
Attaching the presser foot
foot holder (b) and the presser foot (e) will engage
Lower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower the
automatically.
presser foot holder (b) and the presser foot (e) will engage automatically.
LNIS-BLQ2-QGF
Baby Lock
(BLQ2-QGF)
Needs new photo can not see the guide
Needs new photo can not see the guide
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bottom
simultaneously to ensure matching of the fabric layers, used for quilting layers of fabric
and batting, and when matching checked, striped or plaid fabrics.
To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)
To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slowly
and swing the PDQ mechanism forward under the back of the presser foot until it is
engaged and stays in the system.
To deactivate the PDQ system, raise the presser foot, pull down on the mechanism and
swing it to the rear then raise the PDQ up.
800-422-2952
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric
from the top and bottom simultaneously to ensure matching of the
fabric layers, used for quilting layers of fabric and batting, and when
matching checked, striped or plaid fabrics.
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bo
simultaneously to ensure matching of the fabric layers, used for quilting layers of fab
To Activate and Deactivate the Precision Dual-Feed
and batting, and when matching checked, striped or plaid fabrics.
Quilting System (PDQ)
To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)
To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slow
and swing the PDQ mechanism forward under the back of the presser foot until it is
To activate the PDQ system, raise the presser foot. Lower the PDQ
engaged and stays in the system.
mechanism slowly and swing the PDQ mechanism forward under the
back of the presser foot until it is engaged and stays in the system.
To deactivate the PDQ system, raise the presser foot, pull down on the
mechanism and swing it to the rear then raise the PDQ up.
To deactivate the PDQ system, raise the presser foot, pull down on the mechanism a
swing it to the rear then raise the PDQ up.
1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PD
2. Adjust the grey guide to the desired distance. Use the red marking lines on the
foot to reference 3/8", _", 5/8", _", 7/8", 1, 1-1/8" distances from the needle.
1. Place the edge of the fabric aligned with the grey guide on the Adjustable Gui
Foot.
1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PDQ.
2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.
2. Adjust the grey guide to the desired distance. Use the red marking lines on the
foot to reference 3/8", _", 5/8", _", 7/8", 1, 1-1/8" distances from the needle.
1. Place the edge of the fabric aligned with the grey guide on the Adjustable Guide
Foot.
2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.
www.babylock.com