Baby Lock BLQ2-OT Instructions

Adjustable Guide foot (BLQ2-AGF)

Sewing Accessories
Adjustable Guide foot (BLQ2-AGF)
Open Toe Foot
Instructions
The open width makes it perfect for projects that
require visibility and stability, such as appliqué, surface
embellishments, and stitching around intricate areas with
decorative stitches.
marks place the grey guide farther to the right
For projects that require the utmost accuracy, such as garment sewing, topstitching or
INSTRUCTIONS:
piecing the perfect while quilt, this foot comes prepared to help. The built-in ruler with

Removing the presser foot

adjustable guide is perfect for keeping your measurements precise at all times.
marks place the grey guide farther to the right
Raise the presser foot (a).
Removing the presser foot
For projects that require the utmost accuracy, such as garment sewing, topstitching or
Raise the presser foot (a).
piecing the perfect while quilt, this foot comes prepared to help. The built-in ruler with
adjustable guide is perfect for keeping your measurements precise at all times.
Removing the presser foot
Raise the presser foot (a).

Attaching the presser foot

Attaching the presser foot
Lower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower the
presser foot holder (b) and the presser foot (e) will engage automatically.
Lower the presser foot holder (b) until the notch
(c) is directly above the pin (d). Lower the presser
Attaching the presser foot
foot holder (b) and the presser foot (e) will engage
Lower the presser foot holder (b) until the notch (c) is directly above the pin (d). Lower the
automatically.
presser foot holder (b) and the presser foot (e) will engage automatically.
LNIS-BLQ2-OT
Baby Lock
(BLQ2-OT)
Needs new photo can not see the guide
Needs new photo can not see the guide
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bottom
simultaneously to ensure matching of the fabric layers, used for quilting layers of fabric
and batting, and when matching checked, striped or plaid fabrics.
To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)
To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slowly
and swing the PDQ mechanism forward under the back of the presser foot until it is
engaged and stays in the system.
To deactivate the PDQ system, raise the presser foot, pull down on the mechanism and
swing it to the rear then raise the PDQ up.
800-422-2952
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric
from the top and bottom simultaneously to ensure matching of the
fabric layers, used for quilting layers of fabric and batting, and when
matching checked, striped or plaid fabrics.
The Precision Dual-Feed Quilting System (PDQ) feeds the fabric from the top and bo
To Activate and Deactivate the Precision Dual-Feed
simultaneously to ensure matching of the fabric layers, used for quilting layers of fab
and batting, and when matching checked, striped or plaid fabrics.
Quilting System (PDQ)
To Activate and Deactivate the Precision Dual-Feed Quilting System (PDQ)
To activate the PDQ system, raise the presser foot. Lower the PDQ mechanism slow
To activate the PDQ system, raise the presser foot. Lower the PDQ
and swing the PDQ mechanism forward under the back of the presser foot until it is
engaged and stays in the system. mechanism slowly and swing the PDQ mechanism forward under the
back of the presser foot until it is engaged and stays in the system.
To deactivate the PDQ system, raise the presser foot, pull down on the
mechanism and swing it to the rear then raise the PDQ up.
To deactivate the PDQ system, raise the presser foot, pull down on the mechanism a
swing it to the rear then raise the PDQ up.
1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PD
2.
Adjust the grey guide to the desired distance. Use the red marking lines on the
foot to reference 3/8", _", 5/8", _", 7/8", 1, 1-1/8" distances from the needle.
1. Place the edge of the fabric aligned with the grey guide on the Adjustable Gui
Foot.
1. Remove the all-purpose foot. Attach the Adjustable Guide foot and engage PDQ.
2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.
2.
Adjust the grey guide to the desired distance. Use the red marking lines on the
foot to reference 3/8", _", 5/8", _", 7/8", 1, 1-1/8" distances from the needle.
1. Place the edge of the fabric aligned with the grey guide on the Adjustable Guide
Foot.
2. Lower the presser foot. Select the desired stitch. Sew at a consistent speed.
www.babylock.com