Removing
accumulated
lint
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. If you have any questions
or comments, please call our toll-free number
at l-800-447-6737.
For all electric
dryers, or gas dryers
1.
Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel (electric) or lower
front access panel (gas).
3. Remove lint from shaded area in illustra-
tion with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats
(electric), funnel (gas), or ignitor (gas).
4. Replace panel.
5. Reconnect and level dryer again, if
necessary.
Electrical
Shock Hazard
Unplug dryer before removing
dryer
panels.
Wear gloves when handling
dryer
parts.
Failure to do so can result in death,
electrical
shock, or serious
cuts.
Thermostats
Heater
Heat element
A
box
terminals
Electric dryer with back panel removed
lgnitor
Funnel
Gas dryer wlth lower front
access panel removed
12