Recommended Torque Settings - ISLABIKES Rothan Owner's Manual

Tyres and Tubes
Tyre wear - Regularly check tyres for general wear and tear. Over time
your tyres will become more worn and can become more susceptible
to punctures.
Tyre pressure - Regularly check your Islabike tyre pressure as they slowly
go down over time. To check, simply push your thumb hard onto the tyre or
use a pressure gauge fitted to most quality bicycle track pumps. If you can
touch the rim this probably needs some more air.
You should not exceed the maximum tyre pressure printed on the
sidewall of the tyre. We recommend approx. 70% of the maximum
tyre pressure illustrated on your tyre. To inflate presta valves you
must first open the valve by unscrewing and tapping the valve end
to relieve it if stuck. Inflate to correct pressure and then carefully
re-tighten to close the valve.
When re-inflating a tyre or after changing an inner tube ensure
tyre is seated centrally on rim and continually check around the
rim as you inflate to ensure rim is seated correctly and prevent tyre
blowing off rim.
Use our guide to inflate your tyres: http://www.islabikes.co.uk/info-hub/how-
to-inflate-your-tyres-video.
Valve closed
Rothan
Valve open

Recommended torque settings

All stem bolts 7Nm
Seatpost collar bolt 5Nm
Wheel bolts 8Nm
Brake pads 6Nm
Brake cable pinch bolt 6Nm
Brake arm fixing bolts 6Nm
Spares and replacement parts
We carry stock of replacement parts for your Islabike including inner tubes,
tyres and grips. Please visit our website for a list of readily available spares
or contact us on +44 (0)800 008 6297 or email info@islabikes.co.uk.
We only recommend using genuine parts for safety critical components
e.g. brake cables, brake blocks and bolts.
If you can't find what you are looking for or are unsure of any compatibility
for older models, please contact our technical support team by phone
or email.
techsupport@islabikes.co.uk
+44 (0)800 008 6297
www.islabikes.co.uk/info-hub
www.islabikes.co.uk