Mounting Board - Foley Belsaw 200 Adjustment & Operation Instructions

MOUNtINg BOArD

There are two ways of mounting your key machine: directly to your work bench or on a piece of wood, for use
as a portable machine. A portable machine is great to take to a job site or for use in a mobile shop with a power
inverter or the optional 12 volt motor. This setup makes your machine much more versatile.
If you mount the machine on a bench, it should be approximately 36" from the floor. This height will give
the average person a good view of the working parts of the machine without having to stoop over. The actual
dimensions for the board should be approximately 13" x 12-1/2" x 3/4" plywood or hardwood. Figure A shows
an example of a mounting board. Figure A-2 shows the machine mounted on the board and the six mounting
holes. You can also cut a hole in the handle to carry the machine and mount rubber feet on each bottom corner
for stability on uneven surfaces. Foley-Belsaw also sells a board with rubber feet and a tool box (5749829), a
lamp (5749784), or both together (5749790).
Figure A-2
2