Optional Accessories - Foley Belsaw 200 Adjustment & Operation Instructions

UPGRADE YOUR MODEL 200 KEY MACHINE
Direct Read Digital Micrometer Depth Kit
Order No. 5729727
SAVE WHEN YOU BUY BOTH TOGETHER!
FOLEY-BELSAW KEY MACHINE WORK STATION
Everything you need to make your Model 200 Key
Machine portable. This 3/4" hardwood board is just the
right size and light enough to carry to the job. Your
board comes with pre-drilled holes, mounting
screws and rubber feet. The work
station comes complete with a
heavy duty storage box— to store
your extra cutters, tools and
parts -- and a gooseneck lamp.
COMPLETE KIT
Order No. 5749790
FLEX SHAFT LAMP (ONLY)
Order No. 5749784
BOARD WITH RUBBER FEET AND BOX
Order No. 5749829
KEY CUTTERS
Worn cutters grind slowly and
can cause slips that spoil blanks
and prevent accurate duplica-
tion. These cutters will fit any
Foley-Belsaw Model 200 Key
Machine.
Steel Cutter
Order No. 5726010
Code Cutter
Order No. 5726011
Duplicating Cutter
Order No. 5726012
place your order M-F 8am to 4:30pm (Cst) call toll free:
1-800-821-3452 fax: 816-483-5010 online: www.Foley-Belsaw.com
200 KEY MACHINE OptIONAl ACCEssOrIEs
Upgrade turns your Model 200 Key Machine into a code cutter worth hundreds of dollars, allowing you to
control both the depth and the spacing on your Model 200 machine with the accuracy of a direct read digital
micrometer. These two direct read digital micrometers are only found on key machines that cost hundreds, if
not thousands, of dollars more.
If you already have the digital spacing micrometer, then you know how much easier these micrometers are
to use and read. The reading is direct so you always know the setting. You no longer have to remember how
many revolutions you made or go back to 0 every time. Just dial the number in and make your cut. The depth
micrometer comes with a new casting drilled to fit the larger shaft on the micrometer and new tracer guides to
fit the barrel of the micrometer.
Direct Read Digital Micrometer Spacing Kit
Kit includes:
digital mic.,
one each
tracer guide,
guide arm
casting and
instructions.
Order No. 5729728
Order No. 5729726
6010 6011
Kit includes:
digital mic.,
mounting
bracket, &
instructions.
12 VOLT D.C. MOTOR FOR MODEL 200
Many students and customers
use their Model 200 Key Machines
in their cars, trucks or vans. This
12V motor allows you to use the
Model 200 in any mobile applica-
tion where 12V power is available.
Includes:
A Pulley
z
A template to mark new
z
holes in the old motor mount
bracket from the 110 volt mo-
tor (Reuse the same bracket
and mounting screws from
the 110V motor).
Order No. 5727190
STEEL WIRE BRUSHES
Made to fit your Foley-Belsaw Machine, these
brushes are excellent for removing burrs and
tarnish and polishing brass key blanks. Made
in coarse or fine steel for all types of work.
We recommend the coarse for regular key
6012
deburring. Brushes are 4" diameter with a 1/2"
hole.
Order No. 5786696...Coarse
Order No. 5786697...Fine
NYLON REPLACEMENT BRUSH
This carbide impregnated brush deburrs faster
and smoother than wire and lasts 6 times longer.
Non- flaring design prevents flying wire strands.
Fits the Foley-Belsaw Model 200 Key Machine.
Order No. 5787427
COMPLETE MODEL 200 KEY MACHINE
Model 200 Key with both micrometers
Order No. 5729729