Whirlpool LER5600HQ0 Use And Care Manual page 17

C
HANGING THE DRUM LIGHT
The dryer light automatically turns on inside the
dryer drum when you open the door. Your dryer's
drum light may be one of two types, as shown.
To change drum light type 1:
1.
Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
2.
Open the dryer door. Remove the light bulb
3.
Remove the light bulb by turning it
counterclockwise.
4.
Replace the bulb with a 40-watt appliance
bulb only.
5.
Replace the light bulb cover and lock in
6.
Plug in dryer or reconnect power supply.
cover from the back
wall of the dryer by
turning the cover
clockwise.
place by turning
counterclockwise.
wWARNING
ire Hazard
F
Replace light bulb cover before
operating dryer.
Failure to do so can result in death
or fire.
To change drum light type 2:
1.
Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
2.
Open the dryer door. Remove the light bulb cover
3.
Remove the light bulb by turning it
counterclockwise.
4.
Replace the bulb with a 10-watt appliance
bulb only.
5.
Replace the light bulb cover.
6.
Plug in dryer or reconnect power supply.
CARING FOR YOUR DRYER
from the back wall of the
dryer by removing the
screw located in the
lower right corner of
the cover.
17