When some malfunctions occur, the appliance will display error codes to warn you:
Longer inlet time
Failure of orientation of distributary valve
Holding a button for longer than 30 seconds
• If overflow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
SHARP ELECTRONICS CORPORATION • 100 Paragon Drive • Montvale, New Jersey 07645 • USA
Faucet is not opened, or water intake is restricted, or
water pressure is too low
Some element of dishwasher leaks
Open circuit or break of distributary valve
Water or some other material on the button