TDS BN-20 Maintenance Manual page 5

Replacing the Waste Cartridge
When the waste cartridge is filled with waste fluid, the Utility window automatically opens and
displays a message in the Status column that prompts the replacement of the cartridge. Follow
the messages instructions and prepare a replacement waste cartridge or replace the waste
cartridge.
Note: Remove the waste cartridge after the message appears in the Utility window. If this
procedure is not followed, discharge fluid may overflow from the main unit and stain your hands
or drip and stain the floor.
When you replace the cartridge, the following message is displayed. Take necessary action in
accordance with the message.
To purchase a waste cartridge, contact your authorized dealer or Roland DG. Never use a used
waste cartridge. The waste fluid may overflow because it cannot be managed properly.
Note: Never place discharged fluid cartridge near open flames. These fluid s are fire risks.
Note: Never open the cap of the waste cartridge. If the fluid is spilled or vapor escapes, this may
be a fire risk, or the fumes may induce nausea.
BN-20 Maintenance Guide