TDS BN-20 Maintenance Manual page 17

BN-20 Maintenance Guide
3. When the operation is completed, close the front cover.
Replacing the Cutter Blade
When the cutter blade is blunt, the edge is chipped, or the cutting quality has deteriorated,
replace with a new cutter blade.
Note: Always carefully follow the procedures in accordance with the instructions. Otherwise a
sudden movement of the machine may cause injury.
Note: Never touch the edge of the blade. Doing so may result in injury.
Procedure
1. Open the Utilit window.
2. In the [Replace Tools] tab, click [Replace Tools].
If the screen shown in the figure appears, open the front cover and replace the blade.