CAC001-00_IB_RAC QMD_EU_EN-WEB_.indd 27
Display lighting function
Use the Display lighting function to turn on or off the lighting of the
indoor unit display.
▶
Controlling the indoor units individually
Use the Zone function to choose the indoor unit you want to operate
individually. For example, select Zone 1 to control only the indoor unit 1.
Select one from
▶
Zone 1 to Zone 4.
NOTE
• You can select either one or all of Zone 1 to Zone 4.
• The indoor unit numbers must be set by the installer: the installer
sets a number on each indoor unit. To change the existing indoor unit
numbers, contact a service centre.
• The current Zone function settings persist even if you change the
current mode or you turn off and then turn on the remote control.
The zone selection you made using the remote control is reset when
the remote control batteries are replaced.
Select
▶
▶
Lighting.
▶
2020-02-05 오후 12:54:40
English
27