Lan Connection; Setting Up And Powering A Button - BenQ InstaShow S User Manual

(If no extender power cable is included in the package)
Connect the supplied power adapter to the power jack of the Host, and then plug the other end of
the power adapter into a wall socket. The LED indicator on the standby button of the Host lights up
static green when the power is supplied.
For BenQ IFP (Interactive Flat Panel) products, please have power supplied via a power adapter.
Do not keep the device powered on all the time. For better performance, power off the device for 30 minutes in
every 24 hours then restart it.

LAN connection

The Host can be connected to a local network or directly to a laptop. The LAN connection can be
used to configure your product and update the software. Insert a network cable with RJ-45
connectors into the LAN port and connect the other side to a LAN.

Setting up and powering a Button

1. Connect the Button's HDMI and USB jacks to the corresponding inputs of a laptop. See the illus-
tration.
20 Installation
HDMI
HDMI
1.4
USB
3.0
POWER
HDMI