Table of Contents
Advertisement
User manual
P/N 3-9008-556
Figure 4-2: Control valve flow direction
EQUIPMENT HAZARD
Never use this equipment for any purpose other than its intended use.
Failure to comply may result in death, serious personal injury and/or property damage.
4.3.2
Piping recommendations
NOTICE
When installing the control valve, ensure that the bolts conform to the requirements of
ASME B16.5 paragraph 5.3 and to the material requirements of ASME B16.5 Table 1B.
Gaskets must conform to the requirements of ASME B16.20.
The design of the control valve has not been assessed for the effects of traffic, wind or
earthquake loading.
User manual
WARNING
Prepare the control valve for use
October 2019
63
Advertisement
Table of Contents
