Road Sign Assist (Rsa) - Toyota Mirai 2020 Quick Reference Manual

TOYOTA SAFETY SENSE

Road Sign Assist (RSA)

Road Sign Assist is designed to help ensure drivers are kept informed. The RSA
system recognizes specific road signs using a forward-facing intelligent camera to
provide information to the driver via a Multi-information Display (MID). If the system
judges that the vehicle is being driven over the speed limit, or performing actions
prohibited by other support types of road signs, it alerts the driver using a warning
display and may sound a warning buzzer.
RSA DISPLAY
When the driving assist systems
display is selected, a maximum of
2 signs can be displayed.
SUPPORTED TYPES OF ROAD SIGNS
Speed limit
Do Not Enter
SETTING RSA
(1) Press " " switches and select
(2) Press " " switches and select the
(3) Press " " each time to change the setting.
(4) Press " " to go back to the menu.
Note: If the ignition switch was last turned off while a speed limit sign was
displayed on the multi-information display, the same sign displays again when
the ignition switch is turned back ON.
Refer to the Owner's Manual for additional information on RSA operation, settings
adjustments, limitations, and precautions before attempting to use it.
™
When a tab other than the driving
assist systems display is selected,
only a recognized speed limit sign or
do not enter sign (when notification is
necessary) will be displayed.
Stop
Yield
from the Multi-Information Display (MID).
setting function and then press "
42
."