Toyota Mirai 2020 Quick Reference Manual page 35

CHANGING PRE-COLLISION ALERT TIMING
Each time the PCS switch is pressed, the response to the PCS alert timing changes.
(1) Press " " switches and select
(2) Press " " switches and select
The setting screen is displayed.
(3) Press " " each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press "
go back to the menu.
Note: PCS is enabled each time the ignition switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press " " switches and select
(2) Press " " switches and select
The setting screen is displayed.
(3) Press " " to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to the Toyota Owner's Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Far
Middle
(default)
Near
from the Multi-Information Display (MID).
from the MID and then press "
from the Multi-Information Display (MID).
from the MID and then press "
33
".
" to
".