Side Wall Vent Kit - Amana MES96 U Series Installation Instructions Manual

10"- 24"
6" MAX
4" MIN
Standard Horizontal Terminations (Dual Pipe)
Figure 17
ELBOWS
HIGHEST ANTICIPATED
Alternate Horizontal Vent Termination (Dual Pipe)
Figure 18
90°
ELBOWS
Combustion Air Intake may also be snorkeled
to obtain 12" min ground clearance.
Alternate Vent Termination Above Anticipated Snow Level
(Dual Pipe)
Figure 19
12" MIN. TO GRADE OR
HIGHEST ANTICIPATED
SNOW LEVEL
90°
3" - 24"
12" MIN. ABOVE
SNOW LEVEL
Termination of Multiple Direct Vent Furnaces
Vent/Intake Terminations For Installation
of Multiple Direct Vent Furnaces
If more than one direct vent furnace is to be installed vertically
through a common roof top, maintain the same minimum clear-
ances between the exhaust vent and air intake terminations of
adjacent units as with the exhaust vent and air intake terminations
of a single unit.
If more than one direct vent furnace is to be installed horizontally
through a common side wall, maintain the clearances as in the
following figure. Always terminate all exhaust vent outlets at the
same elevation and always terminate all air intakes at the same
elevation.
Concentric Vent Termination Option
Refer to the directions provided with the Concentric Vent Kit
(DCVK) for installation specifications.
Al lowabl e Ins tallation O rent ati on
H oriz ontal Ins tallation
Ve rtica l Ins tallation
Side Wall Vent Kit Option
This kit is to be used with 2" or 3" direct vent systems. The vent
kit must terminate outside the structure and may be installed
with the intake and exhaust pipes located side-by-side or with
one pipe above the other. These kits are NOT intended for
use with single pipe (non-direct vent) installations.
Refer to the directions furnished with the Side Wall Vent
Kit (p/n 0170K00000S or 0170K00001S) for installation
specifications.
16
3"MIN
24"MAX
12" MIN SEPARATION
3" MIN
12" MIN TO GRADE OR HIGHEST
ANTICIPATED SNOW LEVEL
Figure 20

Side Wall Vent Kit

Figure 21