3.2 Removing Auger Drive Parts
To remove the auger drive parts, follow these steps.
NOTE:
Unless otherwise stated, retain all parts for reinstallation.
1. Remove and discard the two bolts (A).
2. Detach auger pivot (B).
3. Remove and discard chain (C).
4. Remove two nuts (A).
5. Remove bolts (B) and spacers (C).
6. Remove bolt (A) and nut (B).
7. Remove adjuster bracket (C).
214079
INSTALLATION INSTRUCTIONS
Figure 3.13: Auger Pivot Installed
Figure 3.14: Auger Pivot
Figure 3.15: Auger Pivot
12
A
C
C
A
B
C
A
B
B
Revision C