Operation; Using The Appliance; Emptying The Collecting Tray/Filter - Silvercrest STM 1.5 A1 Operating Instructions Manual

Operation

Using the appliance

♦
Slide the On/Off switch /
appliance on (see fig. D).
♦
Move the appliance over the surfaces you want to clean. Dust and
crumbs are sucked up and collected in the collecting tray (see fig. E).
♦
Slide the On/Off switch /
appliance off (see fig. E).
Emptying the collecting tray/filter
♦
Open the collecting tray. Turn the collecting tray clockwise until the
arrows on the collecting tray
(see fig. F).
♦
Carefully pull the collecting tray downwards.
♦
Empty the collecting tray.
♦
Turn the appliance around.
♦
Pull the filter upwards out of the appliance (see fig. G).
│ GB │ IE
■ 34
to the position to switch the
to the position to switch the
and the appliance are aligned
STM 1.5 A1