Step 2 - Assemble The Screen - Insignia NS-SCR120FIX19W Assembly Manual

Adjust the four frame pieces to create a rectangle. The outer corners of the
4
frame should be 90° angles.
Lock the frame pieces into place using four screws for each corner.
5
Note: If there's a big gap between the frame pieces, adjust the tightness of the
screws to reduce the gap.
Step 2 – Assemble the screen
You'll need
Short fiberglass tube (4)
Long fiberglass tube (2)
Connect two of the short fiberglass tubes with a fiberglass joint to create one
1
extra long fiberglass tube. Repeat to connect the other two short fiberglass
tubes.
Insert the long fiberglass tubes vertically and the extra long fiberglass tubes
2
horizontally into the tube slots on the screen fabric.
6
Fiberglass joint (2)
Fiberglass joint
Short fiberglass tube
Screen fabric
Fiberglass tube
www.insigniaproducts.com
Screen fabric (1 roll)
Short fiberglass tube