Table of Contents
Advertisement
RESONATOR
Insert also the r esonator (the orange component with 3 leads). This part is not polarized so you can
insert it in any direction.
INSERTING ICs
Next don't forget to place I Cs into the sockets (1x M CP6004 , 1x A tmega ) . T here is a notch on each
IC that should match with the notch on the socket. I nstalling ICs can be also a little tricky. You
should bend the IC leads in slightly with your fingers. Then press all the leads into the sockets in one
shot.
FEMALE HEADERS
As you can see t he female pinheaders left . Hold on with these parts. You will use them in later
steps.
For now you are done with the bottom board. Make the last check that all parts are on the right place
and everything is properly soldered.
9
Advertisement
Table of Contents
