Table of Contents
Advertisement
MALE HEADERS
Solder the m ale pinheaders now (one 6 pins and two d ouble 5 pins ) . Be careful to solder them
straight. This part could be tricky: you may first solder just one of the pins , take the board in your hand
and reheat that pin while pressing down on the header to align it (be careful, you don't want to touch
the pin that you are heating up). Wait for it to cool and solder the rest of the pins.
IC SOCKETS
Solder both I C sockets (14 pin and 28 pin). M ake sure that the notch on the socket matches the
print on the board .
5
Advertisement
Table of Contents
