MSI MS-98M9 Manual page 50

▶ Redirection COM Port
This setting specifies the COM port for redirection.
▶ Resolution
This setting specifies the redirection resolution of legacy OS.
▶ Redirect After POST
This setting determines whether or not to keep terminals' console redirection
running after the POST has booted.
Serial Port for Out-of-Band Management/ Windows Emergency Management
Services (EMS)
▶ Console Redirection
Console Redirection operates in host systems that do not have a monitor
and keyboard attached. This setting enables/disables the operation of console
redirection. When set to [Enabled], BIOS redirects and sends all contents that
should be displayed on the screen to the serial COM port for display on the
terminal screen. Besides, all data received from the serial port is interpreted
as keystrokes from a local keyboard.
▶ Console Redirection Settings
▶ Out-of-Band Mgmt Port
This setting specifies the Out-of-Band Management Port.
▶ Terminal Type
To operate the system's console redirection, you need a terminal supporting
ANSI terminal protocol and a RS-232 null modem cable connected between
the host system and terminal(s). This setting specifies the type of terminal
device for console redirection.
▶ Bits per second, Data Bits, Parity, Stop Bits
This setting specifies the transfer rate (bits per second, data bits, parity,
stop bits) of Console Redirection.
MS-98M9
3-19