Connector; Connector 2-11; Cpu/System Fan Header: Cpufan1, Sysfan1~6; Smbus Box Header: Jsmb1 - MSI MS-98M9 Manual

MS-98M9

Connector

CPU/System Fan Header: CPUFAN1, SYSFAN1~6

The fan power connectors support system cooling fan with +12V. When connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to
GND. If the motherboard has a System Hardware Monitor chipset onboard, you
must use a specially designed fan with speed sensor to take advantage of the
CPU fan control.
Important
• Please refer to the recommended CPU fans at processor's official website or
consult the vendors for proper CPU cooling fan.
• Fan cooler sets with 4-pin PWM FAN available.

SMBus Box Header: JSMB1

This connector is provided for users to connect System Management Bus
(SMBus) interface.

PMBus Box Header: JPMBUS1

The Power System Management Bus connector monitors the power supply, fan,
and system temperatures.
2-11