MSI MS-98M9 Manual page 16

Hardware Setup
2. Align their Pin 1 Alignment
Marks before inserting the CPU
into the processor carrier. If in-
stalled properly, the CPU will
snap into the clips located on
the inside ends of the processor
carrier.
3. Check the heatsink for #1 clip. Flip the heatsink over and align the
CPU's Pin 1 Alignment Mark with the heatsink's #1 clip. Gently en-
gage the CPU and carrier package down. Make sure the attach clips
on the carrier grab onto the heatsink and firmly secure the carrier,
CPU and heatsink as one Processor Heatsink Module.
2-4