Download Print this page
PBteen Shelby Assembly Instructions Manual

PBteen Shelby Assembly Instructions Manual

Storage bed twin / full / queen

Advertisement

Quick Links

Shelby Storage Bed TWIN / FULL / QUEEN
Important safety instructions:
Please read all instruction carefully before assembling this desk.
For your safety, assembly by two or more adults is strongly recommended.
Keep these instructions for future use.
Use only vendor-supplied hardware to assembly this item. Using unauthorized hardware could jeopardize
the structural integrity of the item.
Pre- assembly:
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work
surface. The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until
assembly is complete.
Two people are recommended for your safety and ease of assembly.
Prior to starting the assembly, use the parts and hardware lists to identify and separate each of the
pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
Note: Do not fully tighten any of the bolts until all parts are in place. Failure to follow these instructions
may cause the bolts to misalign during assembly.
Please use caution if using power tools to aid in assembly. Power tools can damage the hardware or
split the wood.
Date: 2014-Sep-05
ASSEMBLY INSTRUCTION
www.pbteen.com
Page 1 of 6

Advertisement

loading

Summary of Contents for PBteen Shelby

  • Page 1 Shelby Storage Bed TWIN / FULL / QUEEN ASSEMBLY INSTRUCTION Important safety instructions: • Please read all instruction carefully before assembling this desk. • For your safety, assembly by two or more adults is strongly recommended. • Keep these instructions for future use.
  • Page 2: Parts Included

    R – Shelf P – Leveler S – Dowel head screw Screw Support Peg 8x15mm 5x13x16x1.5mm Ø 10x25mm 8 x 17mm 3/8”x109x30mm 24pcs 6pcs 16pcs 16pcs 8pcs TOOLS REQUIRED (but not included): Phillip Head Screwdriver Date: 2014-Sep-05 www.pbteen.com Page 2 of 6...
  • Page 3 2. Attach Left & Right HB Legs (C&D) to the Headboard (A) by inserting the Short Allen Bolt (K) with Spring Washer (L) and Flat Washer (M) through pre-drilled holes in the Legs (C&D) into the pre-drilled holes in Headboard Posts (A); tighten with Allen Key (I), as shown below. Date: 2014-Sep-05 www.pbteen.com Page 3 of 6...
  • Page 4 (B) as shown in the illustration below. Adjust Levelers of the Headboard (A) and Footboard (B) until they sit level with the Storage Side rail (F) as shown in illustration below. Figure 2 Date: 2014-Sep-05 www.pbteen.com Page 4 of 6...
  • Page 5 Storage Side rail (F). Gently rest the Shelf Panel (H) on top of the Shelf Support Peg (R) and place the Pan Head Screw (Q) underneath the Shelf Support Peg (R) hole; tighten it using the Philip Head Screwdriver as shown below. Date: 2014-Sep-05 www.pbteen.com Page 5 of 6...
  • Page 6: Care Instructions

    Avoid direct sunlight and excessive temperatures. • Dust often using a clean, soft, dry and lint-free cloth. • Waxing is not recommended on lacquered finish. • Hardware should be checked periodically for tightness. Date: 2014-Sep-05 www.pbteen.com Page 6 of 6...