Table of Contents
Advertisement
Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Ambient temperature
Connection voltage
Connected load
Fuse protection
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Residual moisture in the fabrics
Fabrics/programmes
after spinning
Cottons 6 kg
Cupboard Dry*
1400 rpm
1000 rpm
800 rpm
Iron Dry*
1400 rpm
1000 rpm
800 rpm
Synthetics 3 kg
Cupboard Dry*
800 rpm
600 rpm
* Programme setting for testing in accordance with applicable standard EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of laun-
dry to be dried, residual moisture in the fabric, the degree of dryness that has been set and the
amount of laundry being loaded.
Fabrics/programmes
Drying time
Cottons 6 kg / 3 kg*
Cupboard Dry***
88 min / per cycle
***Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
(from after-sales service using order number, depending on model)
Platform
WZ
20500
For easier loading and unloading. The basket contained in the drawer can be used to carry
the laundry.
WZ
Exhaust air duct set
20180
The exhaust air is extracted via a hose.
Washer-dryer stack connection set
WZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
20311
to save space. The dryer must be fastened to the washing machine using this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
60 x 60 x 85 cm
approximately 35 kg
6 kg
5 - 35 °C
220 - 240 V
2200 W
10 A
Rating plate or inside of the door
Drying time**
Energy consumption**
(50%)
95 min
(60%)
114 min
(70%)
133 min
(50%)
74 min
(60%)
88 min
(70%)
103 min
(40%)
44 min
(50%)
55 min
Annual energy consumption
427 kWh / per year
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of
your local after-sales service can be found in the enclosed after-sales service directory, or
by calling one of these numbers:
– GB 0344 892 8999 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
Start indicator light does not
light up.
The display panel light and
indicator lights (depending on
model) go out and the
indicator light flashes.
Clean
flashes.
2.76 kWh
Dryer does not start.
3.45 kWh
4.02 kWh
Programme terminated shortly
1.71 kWh
after starting.
2.55 kWh
Water is leaking out.
3.17 kWh
The door opens by itself.
1.00 kWh
The required degree of dryness
1.30 kWh
was not achieved or the drying
time was too long.
Laundry damp.
The humidity in the room has
increased significantly.
One or more indicator lights are
flashing.
Power failure.
Condensation in the exhaust air
duct.
9
Mains plug plugged in?
Programme selected?
Check the socket fuse.
Energy-saving mode is activated
Energy-saving mode instructions.
Start
indicator light
Clean the fluff filter
Exhaust air duct blocked or bent?
Clean the exhaust air duct
If necessary, clean the insect screen on the exhaust air
pipe.
Start button pressed?
Door closed? Programme set?
Ambient temperature greater than 5°C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter
Ambient temperature higher than 35°C
room.
Unsuitable programme selected?
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors
page 6.
Use the next drying programme up or the timer programme
page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Clean the fluff filter
Check the installation conditions
Exhaust air duct blocked or bent?
Clean the exhaust air duct
Switch off, allow to cool, switch back on and restart the
programme.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate. Be careful as the
door, the drum and the laundry may be hot.
Exhaust air duct too long? Check the maximum exhaust
air duct length. Further information
instructions for exhaust air duct.
see the separate
page 4.
page 6.
page 4.
ventilate the
page 7.
page 4.
page 8.
page 6.
Installation
10
Advertisement
Table of Contents
